Pololu Ball Caster with 1/2″ Plastic Ball
This light ball caster uses a 1/2″ diameter plastic ball. The height of the assembled kit ranges from 0.5″ to 0.8″, depending on the combination of included spacers used.
Alternatives available with variations in these parameter(s): ball diameter ball material
|Description||Specs (3)||Pictures (2)||Resources (2)||FAQs (1)||On the blog (3)|
Pololu ball caster with 1/2" plastic ball with included hardware.
This ball caster kit includes a black ABS housing, a 1/2″ diameter plastic ball, two spacers (1/16″ and 1/8″ thick), and two 7/16″ #2 screws and nuts. The total height of the ball caster, 0.53″, can be increased to about 0.7″ using the included spacers. The two included #2 screws can be used to mount the ball caster to your chassis, or you can use your own #2 or M2 screws if your application requires a different length.
Note that our ball casters are designed for small robots; they are not intended to bear more than a few pounds. With more weight than this, friction between the ball and the housing will generally keep it from rolling well.
For detailed dimensions, see the dimension diagram (162k pdf).
Comparison of Pololu ball casters
Pololu ball casters with plastic and metal balls. Ball diameter from left to right: 1″, 3/4″, 1/2″, and 3/8″.
Pololu ball caster
People often buy this product together with:
|Pololu Ball Caster with 3/8″ Plastic Ball|
|Pololu Ball Caster with 1/2″ Metal Ball|
|Pololu Ball Caster with 3/4″ Plastic Ball|