6. Programming the 3pi+ 32U4

6.1. Installing Windows drivers
6.2. Programming using the Arduino IDE
6.3. Programming using avr-gcc and AVRDUDE

The 3pi+ 32U4 is designed to be programmed over USB from the Arduino IDE. It can be programmed from Windows, Linux, and macOS. The ATmega32U4 on the control board comes preloaded with the same USB bootloader as the A-Star 32U4 family of general-purpose programmable ATmega32U4 boards. The following sections will help you get started programming your 3pi+ 32U4.

Related Products

3pi+ 32U4 Control Board
3pi+ 32U4 OLED Robot Kit with 30:1 MP Motors (Standard Edition Kit)
3pi+ 32U4 OLED Robot Kit with 15:1 HPCB Motors (Hyper Edition Kit)
3pi+ 32U4 OLED Robot - Turtle Edition (75:1 LP Motors), Assembled
3pi+ 32U4 OLED Robot - Standard Edition (30:1 MP Motors), Assembled
3pi+ 32U4 OLED Robot - Hyper Edition (15:1 HPCB Motors), Assembled
3pi+ 32U4 OLED Control Board
3pi+ 32U4 Robot Kit with 75:1 LP Motors (Turtle Edition Kit)
3pi+ 32U4 Robot Kit with 30:1 MP Motors (Standard Edition Kit)
3pi+ 32U4 Robot Kit with 15:1 HPCB Motors (Hyper Edition Kit)
3pi+ 32U4 Robot - Turtle Edition (75:1 LP Motors), Assembled
3pi+ 32U4 Robot - Standard Edition (30:1 MP Motors), Assembled
3pi+ 32U4 Robot - Hyper Edition (15:1 HPCB Motors), Assembled
3pi+ 32U4 OLED Robot Kit with 75:1 LP Motors (Turtle Edition Kit)
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors