New product: CP2104 USB-to-Serial Adapter Carrier

Posted by Kevin on 1 October 2013
Tags: new products

We’ve just released a new USB-to-serial adapter based on the Silicon Labs CP2104 USB-to-UART bridge. This tiny, inexpensive board makes it easy to connect a logic-level serial device to a PC, offering access to all of the data, control, and GPIO pins on the CP2104 while measuring only 0.6″ × 0.95″, including its Micro-USB connector. The adapter’s versatile pinout allows it to be used in a number of different ways, including on a breadboard or as a six-pin FTDI cable replacement.

And in case you don’t have a compatible cable lying around, we now also carry Micro-USB cables in two varieties: a standard cable that works with high-speed USB devices, and a thinner version that is lighter and more flexible but limited to low- and full-speed USB.


0 comments

Post a comment

Using your Pololu account allows you to customize your avatar and manage your comments; you can also post anonymously.

New Products

Pololu Reverse Voltage Protector, 4-75V, 8A
ACS37030LMYATR-065B3 Current Sensor Large Carrier -65A to +65A, 3.3V
Glideforce GF01-120503-2-66 Micro Linear Actuator with Feedback Potentiometer: 12V, 2.2kgf, 28mm/s, 30mm Stroke
120:1 Mini Plastic Gearmotor HP, Offset 3mm D-Shaft Output, with 12 CPR Encoder, Side Connector
MP6602 Stepper Motor Driver Carrier
MP6603 Stepper Motor Driver Carrier
TB67S579FTG Stepper Motor Driver Compact Carrier (Soldered Header Pins)
ISO6542F 4-Channel Digital Isolator Carrier, 2/2, Default Low, Functional Isolation
TB67S579FTG Stepper Motor Driver Compact Carrier
TPS2116 Power Multiplexer Carrier with USB Type-C Connector (USB priority)
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors