Motion Control Modules » Stepper Motor Drivers » TB67S579FTG Stepper Motor Driver Carriers »
TB67S579FTG Stepper Motor Driver Carrier - Full Breakout
This breakout board for Toshiba’s TB67S579FTG microstepping bipolar stepper motor driver provides access to all of the driver’s pins, enabling use of its many features, including advanced dynamic mixed decay (ADMD), automatic gain control (AGC), and automatic wave generation system (AWGS). The TB67S579FTG has a wide operating voltage range of 4.5 V to 34 V, and our carrier board can deliver approximately 1.2 A per phase continuously without a heat sink or forced air flow (up to 2 A peak). It features built-in protection against over-current and over-temperature conditions.
Compare all products in TB67S579FTG Stepper Motor Driver Carriers or
16-pin Stepper Motor Drivers.
| Description | Specs (15) | Pictures (12) | Resources (8) | FAQs (4) | On the blog (0) | Distributors (0) |
|---|
Dimensions
| Size: | 0.9″ × 2.05″ |
|---|---|
| Weight: | 4.7 g |
General specifications
| Motor driver: | TB67S579FTG |
|---|---|
| Minimum operating voltage: | 4.5 V |
| Maximum operating voltage: | 34 V1 |
| Continuous current per phase: | 1.2 A2 |
| Maximum current per phase: | 2 A3 |
| Minimum logic voltage: | 2 V4 |
| Maximum logic voltage: | 5.5 V5 |
| Microstep resolutions: | full, non-circular 1/2, 1/2, 1/4, 1/8, 1/16, 1/32 |
| Current limit control: | potentiometer |
| Reverse voltage protection?: | Y |
| Header pins soldered?: | N |
Identifying markings
| PCB dev codes: | md53b |
|---|---|
| Other PCB markings: | 0J16260 |
Notes:
- 1
- 40 V absolute max.
- 2
- At 32 V without a heat sink or forced air flow; max continuous current decreases as supply voltage increases (approx 1.3 A continuous at 12 V).
- 3
- Maximum theoretical current based on components on the board (additional cooling required).
- 4
- This is the input logic high threshold.
- 5
- Absolute maximum voltage on any logic input is 6 V.





















