Motoron M3H256 Triple Motor Controller for Raspberry Pi (Connectors Soldered)

Pololu item #: 5033
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

Price break Unit price (US$)
1 44.95
5 41.35
25 38.05
100 35.00


backorders allowed

The Motoron M3H256 Triple Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. Each module can independently control up to three motors, and multiple Motoron boards can be stacked on top of the same Raspberry Pi for projects that need to control even more motors. The M3H256 supports motor supply voltages from 4.5 V to 48 V and can deliver continuous output currents up to 2 A per motor. This version ships with soldered stackable headers and terminal blocks.

 Description Specs (15) Pictures (8) Resources (5) FAQs (0) On the blog (2) 

Dimensions

Size: 32.5 mm × 56 mm
Weight: 14.5 g1

General specifications

Channels: 3
Model: Motoron M3H256
Control interface: I²C
Minimum operating voltage: 4.5 V
Maximum operating voltage: 48 V2
Continuous output current per channel: 2 A
Peak output current per channel: 6.4 A
Minimum logic voltage: 3.0 V
Maximum logic voltage: 5.5 V
Reverse voltage protection?: Y3
Connectors soldered?: Y

Identifying markings

PCB dev codes: mc3h42a
Other PCB markings: 0J13654

Notes:

1
Not including standoffs.
2
Absolute maximum; higher voltages can permanently destroy the motor drivers. Recommended maximum nominal battery voltage is approximately 36 V, which leaves a safety margin for ripple voltage on the supply line.
3
Note: Reverse voltage protection only works up to 40 V.

Related Products

Motoron M3H256 Triple Motor Controller Kit for Raspberry Pi
Motoron M3H256 Triple Motor Controller for Raspberry Pi (No Connectors or Standoffs)
DRV8256P Single Brushed DC Motor Driver Carrier
Dual TB9051FTG Motor Driver Shield for Arduino
Pololu 5V, 2.5A Step-Down Voltage Regulator D24V22F5
5V, 3.2A Step-Down Voltage Regulator D36V28F5
Aluminum Standoff for Raspberry Pi: 11mm Length, 6mm M2.5 Thread, M-F (4-Pack)
Screw Terminal Block: 2-Pin, 5 mm Pitch, Side Entry (4-Pack)
Screw Terminal Block: 2-Pin, 3.5 mm Pitch, Side Entry (4-Pack)
0.100" (2.54 mm) Female Header: 1x10-Pin, Straight
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Shorting Block: Blue, Top Closed

Related Categories

Motoron M3H256 Triple Motor Controller for Raspberry Pi
Motoron Motor Controllers
Motoron M2H Dual High-Power Motor Controllers for Raspberry Pi
Motoron M3S256 Triple Motor Controller Shield for Arduino
Raspberry Pi Expansion Boards
Motors and Gearboxes
Brushed DC Motor Drivers
Voltage Regulators
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Solderless Breadboards
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors