Regulators and Power Supplies » Step-Up/Step-Down Voltage Regulators » S13VxFx Step-Up/Step-Down Voltage Regulators »
9V, 2.5A Step-Up/Step-Down Voltage Regulator S13V25F9
This synchronous switching step-up/step-down regulator efficiently produces 9 V from input voltages between 2.8 V and 22 V. Its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below 9 V. The board measures 0.9″ × 0.9″, has a typical efficiency of 85% to 95%, and can supply typical continuous output currents between 1 A and 3 A depending on the input voltage. The regulator also features reverse voltage protection and an optional enable input that can be used to put the regulator in a low-power state with a current draw of less than 10 µA per volt on VIN.
Alternatives available with variations in these parameter(s): output voltage Select variant…
Compare all products in S13VxFx Step-Up/Step-Down Voltage Regulators.
Description | Specs (11) | Pictures (16) | Resources (3) | FAQs (0) | On the blog (1) |
---|
File downloads
-
Drill guide for the S13V25Fx Step-Up/Step-Down Voltage Regulators (17k dxf)
This DXF drawing shows the locations of all of the board’s holes.
-
Dimension diagram of the S13V25Fx Step-Up/Step-Down Voltage Regulators (703k pdf)
-
3D model of the S13V25Fx Step-Up/Step-Down Voltage Regulators (5MB step)