Regulators and Power Supplies » Step-Down Voltage Regulators » D36V50Fx Step-Down Voltage Regulators »
12V, 4.5A Step-Down Voltage Regulator D36V50F12
This powerful synchronous switching step-down (or buck) regulator takes an input voltage of up to 50 V and efficiently reduces it to 12 V. The board measures only 1″ × 1″ yet delivers typical maximum continuous output currents between 2.3 A and 6.5 A, depending on the input voltage, which makes it well suited for powering moderate to large loads. An optional enable input with a precise cutoff threshold can be used to put the regulator in a low-power state with a current draw of 10 µA to 20 µA per volt on VIN. The regulator also features reverse voltage protection and a power-good output that indicates when the regulator cannot adequately maintain the output voltage.
Alternatives available with variations in these parameter(s): output voltage
|Description||Specs (11)||Pictures (10)||Resources (3)||FAQs (0)||On the blog (1)|
This DXF drawing shows the locations of all of the board’s holes.