Regulators and Power Supplies » Step-Down (Buck) Voltage Regulators » D36V50Fx Step-Down Voltage Regulators »
7.5V, 5A Step-Down Voltage Regulator D36V50F7
This powerful synchronous switching step-down (or buck) regulator takes an input voltage of up to 50 V and efficiently reduces it to 7.5 V. The board measures only 1″ × 1″ yet delivers typical maximum continuous output currents between 3 A and 7 A, depending on the input voltage, which makes it well suited for powering moderate to large loads. An optional enable input with a precise cutoff threshold can be used to put the regulator in a low-power state with a current draw of 10 µA to 20 µA per volt on VIN. The regulator also features reverse voltage protection and a power-good output that indicates when the regulator cannot adequately maintain the output voltage.
Alternatives available with variations in these parameter(s): output voltage Select variant…
Compare all products in D36V50Fx Step-Down Voltage Regulators.
Description | Specs (11) | Pictures (10) | Resources (3) | FAQs (0) | On the blog (1) |
---|
File downloads
-
Dimension diagram of the D36V50Fx Step-Down Voltage Regulator (312k pdf)
-
3D model of the D36V50Fx Step-Down Voltage Regulator (5MB step)
-
Drill guide for the Pololu D36V50Fx family of step-down voltage regulators (52k dxf)
This DXF drawing shows the locations of all of the board’s holes.