Electronics » Sensors » Encoders »
Magnetic Encoder Disc for 20D mm Metal Gearmotors, OD 9.7 mm, ID 2.0 mm, 12 CPR (Bulk)
These magnetic discs can be used with our 20D mm metal gearmotors (extended motor shaft versions only) as part of a quadrature encoder system that offers 12 counts per revolution. They are 2 mm thick with an outer diameter of 9.7 mm and an inner diameter of 2.0 mm. Appropriate Hall Effect sensors, such as those in our magnetic encoder pair kit for 20D mm gearmotors, are required to complete the system. These discs are bulk-packaged and must be ordered in multiples of five.
|Description||Specs (4)||Pictures (0)||Resources (2)||FAQs (0)||On the blog (0)|
These magnetic discs are 2 mm thick with a 9.7 mm diameter, and the hole through the center enables them to securely press-fit onto the 2mm-diameter motor shafts of our 20D mm metal gearmotors (extended motor shaft versions only). The disc consists of six evenly spaced magnetic poles (three north-south pairs), which allows for an encoder system that offers 12 counts per revolution. A 20 CPR version of this disc is also available.
This bulk-packaged product is primarily intended for those wanting to integrate these encoder discs into their own systems in higher volumes, but the minimum quantity is set to five for those who want to just get a few as replacements or samples. For order quantities beyond what we have in stock, please contact us for lead time estimates.
People often buy this product together with:
|Magnetic Encoder Disc for 20D mm Metal Gearmotors, OD 9.7 mm, ID 2.0 mm, 20 CPR (Bulk)|
|Magnetic Encoder Pair Kit for 20D mm Metal Gearmotors, 20 CPR, 2.7-18V|
|Magnetic Encoder Disc for Micro Metal Gearmotors, OD 7.65 mm, ID 1.0 mm, 12 CPR (Bulk)|