TB67S279FTG Stepper Motor Driver Carrier - Full Breakout

Pololu item #: 2974
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

Price break Unit price (US$)
1 12.75
5 11.73
25 10.79
100 9.93


backorders allowed

This breakout board makes it easy to use Toshiba’s TB67S279FTG microstepping bipolar stepper motor driver, which features adjustable current limiting and seven microstep resolutions (down to 1/32-step). In addition, it dynamically selects an optimal decay mode by monitoring the actual motor current, and it can automatically reduce the driving current below the full amount when the motor is lightly loaded to minimize power and heat. The TB67S279FTG has a wide operating voltage range of 10 V to 47 V and can deliver approximately 1.2 A per phase continuously without a heat sink or forced air flow (up to 2 A peak). It features built-in protection against under-voltage, over-current, and over-temperature conditions; our carrier board also adds reverse-voltage protection (up to 40 V).

Alternatives available with variations in these parameter(s): continuous current per phase Select variant…

 Description Specs (15) Pictures (10) Resources (13) FAQs (4) On the blog (1) 

Dimensions

Size: 1.0″ × 1.4″
Weight: 4.3 g1

General specifications

Motor driver: TB67S279FTG
Minimum operating voltage: 10 V
Maximum operating voltage: 47 V
Continuous current per phase: 1.2 A
Maximum current per phase: 2 A
Minimum logic voltage: 2 V2
Maximum logic voltage: 5.5 V
Microstep resolutions: full, non-circular 1/2, 1/2, 1/4, 1/8, 1/16, 1/32
Current limit control: potentiometer
Reverse voltage protection?: Y3
Header pins soldered?: N

Identifying markings

PCB dev codes: md34b
Other PCB markings: 0J11196, blank white box

Notes:

1
Without included hardware.
2
This is the input logic high threshold.
3
Note: Reverse voltage protection only works up to 40 V.

Related Products

Tic T249 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
Tic T249 USB Multi-Interface Stepper Motor Controller
TB67S249FTG Stepper Motor Driver Carrier - Full Breakout
TB67S249FTG Stepper Motor Driver Compact Carrier
TB67S249FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)
TB67S279FTG Stepper Motor Driver Compact Carrier
TB67S279FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)
TB67S128FTG Stepper Motor Driver Carrier
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
Screw Terminal Block: 2-Pin, 3.5 mm Pitch, Side Entry (4-Pack)
0.100" (2.54 mm) Shorting Block: Blue, Top Closed

Related Categories

TB67S2x9FTG Stepper Motor Driver Carriers
Stepper Motor Drivers
Tic Stepper Motor Controllers
Stepper Motors
Solderless Breadboards
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Crimp Connector Housings
0.1″ (2.54 mm) Male Headers
0.1″ (2.54 mm) Female Headers
Nuts and Screws
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors