DRV8880 Stepper Motor Driver Carrier

Pololu item #: 2971 159 in stock
Brand: Pololu
Status: Active and Preferred 
RoHS 3 compliant
 Free add-on shipping in USA 
This item could qualify for free shipping Free shipping in USA over $40 

Price break Unit price (US$)
1 6.95
5 5.95
25 5.49
100 4.95
500 4.49


backorders allowed

This breakout board for TI’s DRV8880 microstepping bipolar stepper motor driver features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/16-step). In addition, the driver’s current limit can be dynamically reduced to save power, and it has an autotune feature that automatically selects the decay mode that results in the smoothest current waveform. The carrier has a pinout and interface that are nearly identical to those of our A4988 carriers, so it can be used as a drop-in replacement for those boards in many applications. The DRV8880 operates from 6.5 V to 45 V and can deliver up to approximately 1 A per phase continuously without a heat sink or forced air flow (up to 1.6 A peak). This board ships with 0.1″ male header pins included but not soldered in.

 Description Specs (13) Pictures (10) Resources (8) FAQs (4) On the blog (1) 

DRV8880 stepper motor driver carrier with included header pins.

DRV8880 stepper motor driver carrier.

DRV8880 stepper motor driver carrier.

DRV8880 stepper motor driver carrier with dimensions.

DRV8880 stepper motor driver carriers with included header pins soldered.

Schematic diagram of the DRV8880 Stepper Motor Driver Carrier.

Schematic of nSLEEP and nFAULT pins on DRV8880 carrier.

Minimal wiring diagram for connecting a microcontroller to a DRV8880 stepper motor driver carrier (1/8-step mode).

Alternative minimal wiring diagram for connecting a microcontroller to a DRV8880 stepper motor driver carrier (1/8-step mode).

Jumpers for configuring AutoTune and decay modes on the DRV8880 stepper driver carrier.


Related Products

DRV8825 Stepper Motor Driver Carrier, High Current
DRV8834 Low-Voltage Stepper Motor Driver Carrier
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black

Related Categories

Stepper Motor Drivers
Stepper Motors
Tic Stepper Motor Controllers
Solderless Breadboards
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Crimp Connector Housings
0.1″ (2.54 mm) Male Headers
0.1″ (2.54 mm) Female Headers
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors