Motion Control Modules » Stepper Motor Drivers » STSPIN220 Low-Voltage Stepper Motor Driver Carriers »
STSPIN220 Low-Voltage Stepper Motor Driver Carrier
This breakout board for STMicro’s STSPIN220 low-voltage microstepping bipolar stepper motor driver offers microstepping down to 1/256-step and operates from 1.8 V to 10 V, allowing stepper motors to be powered with voltages that are too low for other drivers. It can deliver up to approximately 1.1 A per phase continuously without a heat sink or forced air flow (up to 1.3 A peak). The module has a pinout and interface that are very similar to that of our popular A4988 carriers, so it can be used as a drop-in replacement for those boards in many applications.
Alternatives available with variations in these parameter(s): header pins soldered? Select variant…
Compare all products in STSPIN220 Low-Voltage Stepper Motor Driver Carriers or 16-pin Stepper Motor Drivers.
| Description | Specs (15) | Pictures (8) | Resources (7) | FAQs (4) | On the blog (1) | Distributors (47) |
|---|
|
STSPIN220 Low-Voltage Stepper Motor Driver Carrier with included headers. |
|---|
 |
STSPIN220 Low-Voltage Stepper Motor Driver Carrier. |
|---|
 |
STSPIN220 Low-Voltage Stepper Motor Driver Carrier (top view). |
|---|
 |
STSPIN220 Low-Voltage Stepper Motor Driver Carrier, bottom view with dimensions. |
|---|
 |
STSPIN220 Low-Voltage Stepper Motor Driver Carriers with included header pins soldered. |
|---|
 |
Minimal wiring diagram for connecting a microcontroller to a STSPIN220 low-voltage stepper motor driver carrier. |
|---|
 |
Jumpers for FLT and VREF pins on the STSPIN220 low-voltage stepper driver carrier. |
|---|
 |
Schematic diagram of the STSPIN220 Low-Voltage Stepper Motor Driver Carrier. |
|---|
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Lists | Distributors | BIG Order Form | About | Contact
© 2001–2025 Pololu Corporation
