Regulators and Power Supplies » Step-Up/Step-Down Voltage Regulators » S9V11x Step-Up/Step-Down Voltage Regulators »
5V Step-Up/Step-Down Voltage Regulator w/ Adjustable Low-Voltage Cutoff S9V11F5S6CMA
The S9V11F5S6CMA switching step-up/step-down regulator efficiently produces a fixed 5 V (default) or 6 V (selectable) output whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.) The regulator also has a precision-adjustable low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge. The compact (0.5″ × 0.6″) module can supply a typical output current of up to 1.5 A when the input voltage is close to the output voltage.
Compare all products in S9V11x Step-Up/Step-Down Voltage Regulators.
Description | Specs (11) | Pictures (15) | Resources (3) | FAQs (0) | On the blog (1) |
---|
![]() |
5V Step-Up/Step-Down Voltage Regulator w/ Adjustable Low-Voltage Cutoff S9V11F5S6CMA (silkscreen side). |
---|
![]() |
5V Step-Up/Step-Down Voltage Regulator w/ Adjustable Low-Voltage Cutoff S9V11F5S6CMA (non-silkscreen side). |
---|
![]() |
5V Step-Up/Step-Down Voltage Regulator w/ Adjustable Low-Voltage Cutoff S9V11F5S6CMA with included optional header pins. |
---|
![]() |
5V Step-Up/Step-Down Voltage Regulator w/ Adjustable Low-Voltage Cutoff S9V11F5S6CMA next to US quarter dollar for size reference. |
---|
![]() |
5V Step-Up/Step-Down Voltage Regulator w/ Adjustable Low-Voltage Cutoff S9V11F5S6CMA labeled pinout. |
---|
![]() |
5V Step-Up/Step-Down Voltage Regulator w/ Adjustable Low-Voltage Cutoff S9V11F5S6CMA (silkscreen side). |
---|
![]() |
5V Step-Up/Step-Down Voltage Regulator w/ Adjustable Low-Voltage Cutoff S9V11F5S6CMA (non-silkscreen side). |
---|
![]() |
A multi-turn potentiometer can be used to adjust the low-voltage cutoff of the S9V11xCMA voltage regulators. |
---|
![]() |
Step up/step down regulator S9V11MACMA on a breadboard. |
---|
![]() |
Step up/step down regulator S9V11F5S6CMA on a breadboard. |
---|
![]() |
Step up/step down regulator S9V11F3S5 on a breadboard. |
---|
![]() |
To permanently select the alternate output voltage on the S9V11FxSx versions, you can solder a piece of wire between SEL and the unpopulated pad next to it. |
---|
![]() |
Typical maximum continuous output current of Step-Up/Step-Down Voltage Regulator S9V11x |
---|
![]() |
Typical efficiency of Step-Up/Step-Down Voltage Regulator S9V11x with VOUT set to 5V. |
---|
![]() |
Typical efficiency of Step-Up/Step-Down Voltage Regulator S9V11x with VOUT set to 6V. |
---|