Electronics » Connectors »
DC Barrel Jack to 2-Pin Terminal Block Adapter
This connector adapts a 5.5 × 2.1 mm DC barrel jack to a pair of screw terminals spaced approximately 5 mm (0.2″) apart. The terminals are labeled positive and negative, with the positive terminal connected to the center pin.
| Description | Specs (0) | Pictures (2) | Resources (0) | FAQs (0) | On the blog (1) | Distributors (26) |
|---|
-
New products (and demo): Force-sensing linear potentiometers and resistors
- 15 May 2014We are now carrying four exciting new sensors from Interlink Electronics: 0.25″-diameter circle, short tail force-sensing resistor (FSR)...
Related products
Home | Forum | Blog | Support | Ordering Information | Lists | Distributors | BIG Order Form | About | Contact
© 2001–2025 Pololu Corporation
