RoboClaw 2x45A Motor Controller (V5, pin header I/O)

Pololu item #: 2397
Brand: Basicmicro

This product has been discontinued.

This item has been replaced by the RoboClaw 2x45A (V5D), which includes a protective plastic base and has a port for an optional 5V, 150mA cooling fan.

The RoboClaw motor controllers from Ion Motion Control (formerly Orion Robotics) can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analog inputs. Integrated dual quadrature decoders make it easy to create a closed-loop speed control system. This version can supply a continuous 45 A per channel (60 A peak) and has pin header I/O connections.

Alternatives available with variations in these parameter(s): continuous output current per channel Select variant…

 Description Specs (8) Pictures (3) Resources (2) FAQs (0) On the blog (0) 

Dimensions

Size: 2.1″ × 2.9″ × 0.9″
Weight: 60 g

General specifications

Motor channels: 2
Control interface: USB; non-inverted TTL serial (2-way);
RC servo pulses; analog voltage1
Minimum operating voltage: 6 V
Maximum operating voltage: 34 V
Continuous output current per channel: 45 A
Peak output current per channel: 60 A

Notes:

1
Available baud rates are 2400, 9600, 19,200, and 38,400 bps.

Related Products

RoboClaw 2x7A Motor Controller (V6B)
RoboClaw 2x15A Motor Controller (V6B)
RoboClaw 2x30A Motor Controller (V6B)
RoboClaw 2x45A Motor Controller (V6B, pin header I/O)
RoboClaw ST 2x45A Motor Controller (V6B, screw terminal I/O)
RoboClaw 2x60A Motor Controller (V6)
Jrk 21v3 USB Motor Controller with Feedback
Pololu Simple High-Power Motor Controller 18v15 (Fully Assembled)
Pololu Dual VNH5019 Motor Driver Shield for Arduino
Pololu Qik 2s15v9 Dual Serial Motor Controller
Thin (2mm) USB Cable A to Micro-B, 6 ft, Low/Full-Speed Only
USB Cable A to Micro-B, 6 ft
75:1 Micro Metal Gearmotor HP 6V
34:1 Metal Gearmotor 25Dx64L mm HP 6V with 48 CPR Encoder (No End Cap)
30:1 Metal Gearmotor 37Dx68L mm 12V with 64 CPR Encoder (Spur Pinion)
Magnetic Encoder Pair Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V
Micro Maestro 6-Channel USB Servo Controller (Assembled)
Tamiya Plug with 10cm Leads, Female
Tamiya Plug with 10cm Leads, Male
T Connector Male-Female Pair
XT60 Connector Male-Female Pair, Black
XT60 Connector Male-Female Pair, Yellow

Related Categories

RoboClaw Motor Controllers
Motors and Gearboxes
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Pololu Jrk Motor Controllers with Feedback
Pololu Simple Motor Controllers
Development Boards (Programmable Controllers)
Arduino-Compatible
RC Interface
Wild Thumper All-Terrain Chassis
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors