ACS709 Current Sensor Carrier -75A to +75A

Pololu item #: 2199
Brand: Pololu
Status: Rationed (Active) 
RoHS 3 compliant

Price break Unit price (US$)
1 14.95


backorders allowed

This board is a simple carrier of Allegro’s ±75A ACS709 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~1.1 mΩ) current path and electrical isolation up to 2.1 kV RMS. The sensor has optimized accuracy for currents from -37.5 A to 37.5 A, and the analog voltage output is linear for current magnitudes up to 75 A. The ratiometric output voltage is centered at VCC/2 and has a typical error of ±2%. It operates from 3 V to 5.5 V, so it can interface directly to both 3.3 V and 5 V systems.

 Description Specs (6) Pictures (6) Resources (1) FAQs (0) On the blog (0) 

Dimensions

Size: 0.82″ x 0.9″
Weight: 1.7 g1

General specifications

Current sense: 0.018 V/A2
Minimum logic voltage: 3 V
Maximum logic voltage: 5.5 V
Supply current: 11 mA

Notes:

1
Without included optional header pins.
2
When Vcc is 3.3 V. This specification is proportional to Vcc.

Related Products

ACS711EX Current Sensor Carrier -31A to +31A
ACS711EX Current Sensor Carrier -15.5A to +15.5A
ACS714 Current Sensor Carrier -5A to +5A
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Right Angle
Screwless Terminal Block: 2-Pin, 0.1″ Pitch, Side Entry (3-Pack)
Screw Terminal Block: 2-Pin, 3.5 mm Pitch, Side Entry (4-Pack)
Screw Terminal Block: 2-Pin, 5 mm Pitch, Top Entry (4-Pack)
Premium Jumper Wire 50-Piece 10-Color Assortment F-F 6"

Related Categories

Current Sensors
Terminal Blocks
Premium Jumper Wires
Sensors
Electronics Prototyping
Motion Control Modules
Motors and Gearboxes
RC Servos
Pololu High-Power Motor Drivers
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors