ACS709 Current Sensor Carrier -75A to +75A

ACS709 Current Sensor Carrier -75A to +75A
Pololu item #: 2199 222 in stock

Price break Unit price (US$)
1 9.95
10 8.96


backorders allowed

This board is a simple carrier of Allegro’s ±75A ACS709 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~1.1 mΩ) current path and electrical isolation up to 2.1 kV RMS. The sensor has optimized accuracy for currents from -37.5 A to 37.5 A, and the analog voltage output is linear for current magnitudes up to 75 A. The ratiometric output voltage is centered at VCC/2 and has a typical error of ±2%. It operates from 3 V to 5.5 V, so it can interface directly to both 3.3 V and 5 V systems.

 Description Specs (6) Pictures (6) Resources (1) FAQs (0) On the blog (0) 

File downloads

Allegro ACS709 current sensor datasheet (1MB pdf)

Related Products

ACS711EX Current Sensor Carrier -31A to +31A
ACS711EX Current Sensor Carrier -15.5A to +15.5A
ACS714 Current Sensor Carrier -5A to +5A
ACS715 Current Sensor Carrier 0 to 30A
ACS714 Current Sensor Carrier -30A to +30A
ACS711LC Current Sensor Carrier -12.5A to +12.5A
ACS711LC Current Sensor Carrier -25A to +25A
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Right Angle
Screwless Terminal Block: 2-Pin, 0.1" Pitch, Side Entry (3-Pack)
Screw Terminal Block: 2-Pin, 3.5 mm Pitch, Side Entry (4-Pack)
Screw Terminal Block: 2-Pin, 5 mm Pitch, Top Entry (4-Pack)
Premium Jumper Wire 50-Piece Rainbow Assortment F-F 6"

Related Categories

Current Sensors
Terminal Blocks
Premium Jumper Wires
Sensors
Electronics Prototyping
Motion Control Modules
Motors and Gearboxes
RC Servos
Pololu High-Power Motor Drivers
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors