Electronics » Regulators and Power Supplies » Step-Up/Step-Down Voltage Regulators »
Pololu 5V Step-Up/Step-Down Voltage Regulator S10V4F5
This switching regulator uses the SEPIC topology to produce 5 V from input voltages between 2.5 V and 18 V. The wide input range coupled with its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below 5 V. The compact (0.4″ × 0.575″) module can supply over 400 mA in typical applications.
Alternatives available with variations in these parameter(s): output voltage Select variant…
Compare all products in Step-Up/Step-Down Voltage Regulators.
Description | Specs (10) | Pictures (7) | Resources (3) | FAQs (0) | On the blog (2) |
---|
Dimensions
Size: | 0.4″ × 0.575″ × 0.1″1 |
---|---|
Weight: | 0.6 g1 |
General specifications
Minimum operating voltage: | 2.5 V |
---|---|
Maximum operating voltage: | 18 V |
Maximum output current: | 400 mA2 |
Output voltage: | 5 V |
Reverse voltage protection?: | N |
Maximum quiescent current: | 2 mA3 |
Identifying markings
PCB dev codes: | reg11a |
---|---|
Other PCB markings: | 0J7068 |