USB Weather Board

Pololu item #: 1631

This product has been discontinued.

This product has been replaced by the Weather Shield for Arduino.

This USB weather board from SparkFun is fitted with a SCP1000 absolute pressure (and temperature) sensor, a SHT15 humidity sensor, and a TEMT6000 ambient light sensor. This allows the on-board ATmega8 to deliver pressure, humidity, temperature, and light level via USB. Serial output is a single ASCII string at 9600bps, 8N1, at 1 reading per second.

 Description Specs (2) Pictures (3) Resources (8) FAQs (0) On the blog (0) 

General specifications

Minimum operating voltage: 4 V
Maximum operating voltage: 12 V

Related Products

SparkFun Weather Shield for Arduino
BMP085 Barometric Pressure Sensor Breakout Board
SCP1000 Absolute Pressure Sensor Carrier
MPL115A1 Barometric Pressure Sensor Breakout Board
HIH-4030 Humidity Sensor Carrier
USB Cable A to Mini-B, 5 ft
USB Cable A to Mini-B 3 ft. Retractable
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Right Angle
0.100" (2.54 mm) Female Header: 1x6-Pin, Straight
0.100" (2.54 mm) Female Header: 1x2-Pin, Straight
Shrouded Box Header: 2×3-Pin, 0.100" (2.54 mm) Male

Related Categories

Premium Jumper Wires
Sensors
Wires with Pre-Crimped Terminals
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors