SparkFun Weather Shield for Arduino

SparkFun Weather Shield for Arduino
Pololu item #: 2771 4 in stock

Price break Unit price (US$)
1 39.95
10 35.96

backorders allowed

The SparkFun Weather Shield is an easy-to-use Arduino shield with sensors for measuring barometric pressure, relative humidity, luminosity, and temperature.

 Description Specs (4) Pictures (4) Resources (5) FAQs (0) On the blog (1) 


SparkFun Weather Shield for Arduino with quarter for size reference.

SparkFun’s Weather Shield for Arduino can be used to build an Arduino-controlled weather monitoring station that measures barometric pressure, relative humidity, luminosity, and temperature. This shield incorporates a HTU21D humidity sensor, MPL3115A2 barometric pressure sensor, and ALS-PT19 light sensor and relies on the HTU21D and MPL3115A2 Arduino libraries. The shield has a built-in 3.3 V voltage regulator that lets it operate at 3 V to 10 V.

For documentation and resources to help you use this weather shield, including the HTU21D and MP3115A2 Arduino libraries, see the guide on SparkFun’s site. Datasheets for the individual sensors can be found under the Resources tab.


  • HTU21D Humidity and temperature sensor
  • MPL3115A2 Barometric pressure sensor
  • ALS-PT19 Light sensor
  • Operating voltage: 3 V to 10 V
  • Built-in voltage regulators and signal translators
  • Typical humidity accuracy of ±2 %
  • Typical pressure accuracy of ±50 Pa
  • Typical temperature accuracy of ±0.3°C

Included Hardware

This shield ships with all of its surface-mount parts populated. However, header pins are not included. Our 0.1″ male headers are compatible, but if you plan on stacking multiple shields, we recommend our stackable 0.1″ female header set for Arduino shields.

An Arduino is not included.

SparkFun Weather Shield for Arduino, bottom view.
SparkFun Weather Shield for Arduino, top view.

Note: SparkFun calls this product the “Weather Shield” SKU: DEV-12081. It replaces the older USB Weather Board V3.

Related Products

Stackable 0.100" Female Header Set for Arduino Shields
Arduino Uno R3
Arduino Mega 2560 R3
SparkFun Starter Kit for Arduino-Compatible RedBoard
A-Star 32U4 Prime LV microSD
SparkFun Inventor's Kit (for Arduino Uno) - V3.2
A-Star 32U4 Prime SV microSD
LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator
Arduino Leonardo
HIH-4030 Humidity Sensor Carrier
Adafruit Data Logging Shield for Arduino

Related Categories

Arduino Shields
Weather Sensors
A-Star 32U4 Prime
0.1″ (2.54 mm) Female Headers
0.1″ (2.54 mm) Male Headers
Premium Jumper Wires
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors