USB Weather Board

USB Weather Board
Pololu item #: 1631 0 in stock

This product has been discontinued.

This product has been replaced by the Weather Shield for Arduino.

This USB weather board from SparkFun is fitted with a SCP1000 absolute pressure (and temperature) sensor, a SHT15 humidity sensor, and a TEMT6000 ambient light sensor. This allows the on-board ATmega8 to deliver pressure, humidity, temperature, and light level via USB. Serial output is a single ASCII string at 9600bps, 8N1, at 1 reading per second.

 Description Specs (2) Pictures (3) Resources (8) FAQs (0) On the blog (0) 
USB weather board top view.

USB weather board top view.

USB weather board bottom view.

USB weather board bottom view.

USB weather board host application.

USB weather board host application.


Related Products

SparkFun Weather Shield for Arduino
BMP085 Barometric Pressure Sensor Breakout Board
SCP1000 Absolute Pressure Sensor Carrier
MPL115A1 Barometric Pressure Sensor Breakout Board
HIH-4030 Humidity Sensor Carrier
MLX90614ESF-AAA Infrared Temperature Sensor 90° FOV
USB Cable A to Mini-B, 6 ft
USB Cable A to Mini-B 3 ft. Retractable
Logomatic v2 Serial SD Datalogger
0.100" (2.54 mm) Breakaway Male Header: 1x40-Pin, Straight
0.100" (2.54 mm) Breakaway Male Header: 1x40-Pin, Right Angle
0.100" (2.54 mm) Female Header: 1x6-Pin, Straight
0.100" (2.54 mm) Female Header: 1x2-Pin, Straight
Shrouded Box Header: 2x3-Pin, 0.100" (2.54 mm) Male

Related Categories

Premium Jumper Wires
Sensors
Wires with Pre-crimped Terminals
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors