RN-41 Bluetooth Module Carrier (firmware version 4.77)

RN-41 Bluetooth Module Carrier (firmware version 4.77)
Pololu item #: 1613 0 in stock

This product has been discontinued.

This product has been replaced by the RN-41 Bluetooth Module Carrier. This product has firmware version 4.77, and the replacement has version 6.15.

This simple DIP breakout board from SparkFun for the Roving Networks RN-41 Bluetooth module lets you add a Bluetooth interface to a device that has a 3.3V serial port. Two 0.1" headers spaced 0.8" apart makes it easy to use with standard solderless breadboards and 0.1" perfboards. All pertinent pins are broken out and labeled. The RN-41 Bluetooth module on this carrier has firmware version 4.77.

 Description Specs (0) Pictures (3) Resources (4) FAQs (0) On the blog (0) 

Related Products

BlueSMiRF Silver - Bluetooth Modem
Wixel Programmable USB Wireless Module (Fully Assembled)
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
Premium Jumper Wire 50-Piece Rainbow Assortment M-M 12"
Wires with Pre-crimped Terminals 50-Piece Rainbow Assortment M-M 12"
170-Point Breadboard (White)
66-Channel LS20031 GPS Receiver Module (MT3339 Chipset)
UM6 r2 Ultra-Miniature Orientation Sensor
Maxbotix XL-MaxSonar-EZ0 Sonar Range Finder MB1200
ARM mbed NXP LPC1768 Development Board
CP2104 USB-to-Serial Adapter Carrier

Related Categories

Solderless Breadboards
Premium Jumper Wires
Wires with Pre-crimped Terminals
Programmable Controllers
Robot Controllers
Brushed DC Motor Controllers
RC Servo Controllers
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors