S13VxF5 Step-Up/Step-Down Voltage Regulators

The S13VxF5 family of efficient switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters) use a buck-boost topology to convert both higher and lower input voltages to a regulated 5 V output. They take input voltages from 2.8 V to 22 V and increase or decrease them as necessary, offering a typical efficiency of over 85% and typical continuous output currents between 1 A and 3 A . The flexibility in input voltage offered by this family of regulators is especially well-suited for battery-powered applications in which the battery voltage begins above 5 V and drops below as the battery discharges. Without the typical restriction on the battery voltage staying above the required voltage throughout its life, new battery packs and form factors can be considered.

The regulators have under-voltage lockout, output over-voltage protection, and over-current protection. A thermal shutdown feature also helps prevent damage from overheating and a soft-start feature limits the inrush current and gradually ramps the output voltage on startup. The larger 3 A S13V30F5 has reverse-voltage protection up to 20 V, but the S13V10F5, S13V15F5, and S13V20F5 do not.

Products in category “S13VxF5 Step-Up/Step-Down Voltage Regulators”

Pololu item #: 4083
Brand: Pololu
Status: Active and Preferred 
RoHS 3 compliant
 Free add-on shipping in USA 
This item could qualify for free shipping Free shipping in USA over $40 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This powerful synchronous switching step-up/step-down regulator efficiently produces 5 V from input voltages between 2.8 V and 22 V. Its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below 5 V. The board measures 0.35″ × 0.475″, has a typical efficiency of 85% to 95%, and can supply a typical continuous output current of around 1 A.

Pololu item #: 4084
Brand: Pololu
Status: Active and Preferred 
RoHS 3 compliant
 Free add-on shipping in USA 
This item could qualify for free shipping Free shipping in USA over $40 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This powerful synchronous switching step-up/step-down regulator efficiently produces 5 V from input voltages between 2.8 V and 22 V. Its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below 5 V. The board measures 0.35″ × 0.475″, has a typical efficiency of 85% to 95%, and can supply typical continuous output currents between 1 A and 2 A depending on the input voltage.

Pololu item #: 4085
Brand: Pololu
Status: Active and Preferred 
RoHS 3 compliant
 Free add-on shipping in USA 
This item could qualify for free shipping Free shipping in USA over $40 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This powerful synchronous switching step-up/step-down regulator efficiently produces 5 V from input voltages between 2.8 V and 22 V. Its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below 5 V. The board measures 0.35″ × 0.475″, has a typical efficiency of 85% to 95%, and can supply typical continuous output currents between 1 A and 2.5 A depending on the input voltage.

Pololu item #: 4082
Brand: Pololu
Status: Rationed (Active and Preferred) 
RoHS 3 compliant
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This powerful synchronous switching step-up/step-down regulator efficiently produces 5 V from input voltages between 2.8 V and 22 V. Its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below 5 V. The board measures 0.9″ × 0.9″, has a typical efficiency of 85% to 95%, and can supply typical continuous output currents between 2 A and 4 A depending on the input voltage. The regulator also features reverse voltage protection and an optional enable input that can be used to put the regulator in a low-power state with a current draw of less than 10 µA per volt on VIN.

Related Categories

Step-Up/Step-Down Voltage Regulators
Regulators and Power Supplies
S18V20x Step-Up/Step-Down Voltage Regulators
Battery Holders
Batteries
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Solderless Breadboards
Electronics Prototyping
0.1″ (2.54 mm) Male Headers
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors