Electronics » Programmable Controllers »
mbed Microcontrollers
The mbed microcontrollers are ARM development boards designed for rapid prototyping. Two versions are available:
 mbed NXP LPC1768 |
 mbed NXP LPC11U24 |
|
|---|---|---|
| Processor core | ARM Cortex-M3 | ARM Cortex-M0 |
| Clock | 96 MHz | 48 MHz |
| Program memory | 512 KB | 32 KB |
| RAM | 32 KB | 8 KB |
| Power consumption | 60–120 mA1 | 1–16 mA2 |
| Ethernet |  |
|
| USB interface | Device or host (OTG) | Device only |
| User UARTs | 3 | 1 |
| SPIs | 2 | 2 |
| I2C interfaces | 2 | 1 |
| CAN interfaces | 2 | – |
| Analog inputs | 6 | 6 |
| PWM outputs | 6 | 8 |
| Analog outputs | 1 | – |
| Price | $49.00 | $36.95 |
2 powered with battery on Vb pin
Compare all products in this category
Products in category “mbed Microcontrollers”
The mbed NXP LPC1768 is an easy-to-use MCU development board designed for rapid prototyping. At its heart is a powerful 32-bit ARM Cortex-M3 processor running at 96 MHz with 512 KB flash and 32 KB RAM, which makes it far more capable than popular 8-bit prototyping alternatives. A comprehensive firmware library and plenty of sample code help you get your program up and running quickly, and a free online IDE and C++ compiler means that no software installation is required. Downloading programs is as simple as using a USB flash drive (no external programmer is necessary).
The mbed NXP LPC11U24 is an easy-to-use MCU development board designed for rapid prototyping. At its heart is a low-power 32-bit ARM Cortex-M0 processor running at 48 MHz with 32 KB flash and 8 KB RAM, which makes it more capable than popular, similarly-priced 8-bit prototyping alternatives. A comprehensive firmware library and plenty of sample code help you get your program up and running quickly, and a free online IDE and C++ compiler means that no software installation is required. Downloading programs is as simple as using a USB flash drive (no external programmer is necessary).
The m3pi expansion kit contains everything you need to turn your 3pi robot into an enhanced m3pi robot. The expansion PCB ships with all the surface-mount parts populated, but the included headers, buttons, and connectors must be soldered in.
The Pololu m3pi robot consists of a 3pi robot base with a fully assembled m3pi expansion board as its second level. This expansion board enables the use of a powerful 32-bit mbed development board as the robot’s high-level controller, which offers significantly more processing power and free I/O lines than the 3pi’s built-in 8-bit AVR microcontroller. There are also sockets for Wixel and XBee wireless serial modules as well as prototyping space for additional sensors and electronics.
This combination deal includes everything you need for an mbed-controlled m3pi robot. It consists of one mbed NXP LPC1768 development board and one fully-assembled m3pi robot.
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2017 Pololu Corporation
