Pololu Blog (Page 87)

Welcome to the Pololu Blog, where we provide updates about what we and our customers are doing and thinking about. This blog used to be Pololu president Jan Malášek’s Engage Your Brain blog; you can view just those posts here.

Popular tags: community projects new products raspberry pi arduino more…

Popular Mechanics Build Your First Robot

Posted by Ryan on 3 February 2012

Gordon McComb has published a project in Popular Mechanics called Build Your First Robot. The parts that Pololu offers are in this wish list, and more details are available on Gordon’s site.

Display for compass and accelerometer readings

Posted by Ryan on 3 February 2012

This forum post shows how to use a Baby Orangutan to read the accelerometer and compass values from an LSM303DLH and display them nicely on a 1.8" TFT LCD display. January 2012.

Controlling the Pololu 3pi Robot using a Joystick

Posted by Ben on 3 February 2012

This project by Pololu forum user Wilfredo shows how to control a 3pi robot by directly connecting two joystick outputs to two of its analog inputs. Here is a schematic of his setup:

Schematic for controlling a Pololu 3pi robot using a joystick.

Pololu round robot chassis kit assembly videos

Posted by Ben on 19 January 2012

Dead Things Vlog 3-axis witch head

Posted by Ryan on 9 January 2012

Pat from the Dead Things Vlog recently released this two-part video about programming the Micro Maestro 6-Channel USB Servo Controller to control a 3-axis witch head.

Paper Robots

Posted by Ryan on 6 January 2012

Mike Estee has written up a three-part blog post about crafting hexapod chassis out of paper. The robots are controlled by 18-channel Maestro servo controllers.

Android-controlled Mini Sumo Robot

Posted by Ryan on 6 January 2012

Pololu forum user Mert Öztoprak posted this parts list and the short video above of a Android-controlled mini sumo robot called “Karafatma”.

November 2011 update: new building, new machines

Posted by Jan on 30 November 2011
November 2011 update: new building, new machines

Five months ago, I wrote that we “just finished a big facility expansion that was taking up a lot of my attention this year, so I have some more time now …” Well, that turned out to be wrong. It’s also been over a year since I started this blog, and so far, I am way behind my target of an article per week. It doesn’t help when I don’t post for four months, but some exciting stuff has happened in that time. Continued…

New Products

3.3V, 100mA Step-Down Voltage Regulator D45V1E1F3
RobustMotion RM-EGB Series 24VDC Compact Finger Gripper, 20D, PNP + RS-485 Interface
Pololu I²C Isolator, ISO1640
3.3V, 600mA Step-Down Voltage Regulator D24V7F3
JST PH-Style Cable with Female Pins for 0.1" Housings, 5-Pin, 30cm
JST PH-Style Cable with Female Pins for 0.1" Housings, 4-Pin, 12cm
ACS37042KLHBLT-030B5 Current Sensor Compact Carrier -30A to +30A, 5V
Glideforce GF01-122110-1-66 Micro Linear Actuator with Limit Switches: 12V, 8.1kgf, 6mm/s, 100mm Stroke
ACS37800KMACTR-030B3-I2C Power Monitor Carrier with Secondary I²C Isolation (Soldered Terminal Block, 240VRMS Jumper)
Pololu Isolated USB-to-I²C Adapter with Isolated Power
Pololu Robotics & Electronics
Shopping cart
Menu
My account Comments or questions? About Pololu Contact Ordering information Distributors