Dagu Rover 5 controlled by a Raspberry Pi

Posted by Zeeshan on 23 August 2013

Pololu forum user chrisptx posted this video of his Dagu Rover 5. He is using a Raspberry Pi as the main controller and sending signals to a TReX Jr Dual Motor Controller for drive control.

This rover is controlled by a Samsung Galaxy S3 smartphone, which uses its web browser to send commands to the Raspberry Pi in Javascript.

Featured link: http://forum.pololu.com/viewtopic.php?f=2&t=7250

1 comment

I fix it without using custom cirsuite:


Arduino + Raspberry PI + Dagu 5 Rover + Node.js - http://mbfu.it/r/om

Marco Berri.

Post a comment

Using your Pololu account allows you to customize your avatar and manage your comments; you can also post anonymously.

New Products

QTRX-MD-01A-S Reflectance Sensor: 1-Channel, 8mm Wide, Analog Output, Low Current, Side-Entry Connector
QTRX-MD-01RC-S Reflectance Sensor: 1-Channel, 8mm Wide, RC Output, Low Current, Side-Entry Connector
Pololu Reverse Voltage Protector, 4-60V, 25A
12V, 500mA Step-Down Voltage Regulator D45V5F12
Glideforce GF01-121003-1-66 Micro Linear Actuator with Limit Switches: 12V, 4.3kgf, 17.6mm/s, 30mm Stroke
Pololu Basic 2-Channel SPDT Relay Carrier with 12VDC Relays, Terminal Blocks, and JST SH-Style Top-Entry Connector
JST PH-Style Cable, 2-Pin, Female-Female, 25cm
Pololu Distance Sensor with Pulse Width Output, 300cm Max, Side-Entry Connector
24V, 4A Step-Down Voltage Regulator D42V55F24
JST PH-Style Cable with Female Pins for 0.1" Housings, 4-Pin, 12cm
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors