New products: Fixed 3.3V and 5V Step-up Voltage Regulators U1V10F3 and U1V10F5

Posted by Ben on 19 August 2013
Tags: new products

We have released two new step-up regulators that can boost input voltages as low as 0.5 V. Like the very similar U1V11x line of step-up regulators, these modules automatically switch to a linear down-regulator mode when the input voltage exceeds the output, making them great for powering electronics projects from 1 to 3 NiMH, NiCd, or alkaline cells or from a single lithium-ion cell. These modules do not offer the U1V11x shutdown functionality, which allows them to be much smaller (just 0.35″×0.45″) and a little less expensive ($4.49 each).

These regulators are available with a 3.3 V or 5 V fixed output voltage. For other options, you can take a look at our full selection of step-up voltage regulators, step-down voltage regulators, and step-up/step-down regulators.

0 comments

Post a comment

Using your Pololu account allows you to customize your avatar and manage your comments; you can also post anonymously.

New Products

Pololu Digital Distance Sensor, 25cm, Side-Entry Connector
JST SH-Style Connector Board for Micro Metal Gearmotors, 2-Pin, Back-Entry (2-Pack)
JST SH-Style Cable, 2-Pin, Female-Female, 25cm
ACS37030LLZATR-065B3 Current Sensor Compact Carrier -65A to +65A, 3.3V
JST SH-Style Cable, 4-Pin, Female-Female, 63cm
ACS37800KMACTR-030B3-I2C Power Monitor Carrier with Secondary I²C Isolation (Soldered Terminal Block, 240VRMS Jumper)
0.100″ (2.54 mm) Breakaway Male Header: 1×10-Pin, Straight, Black, 25-Pack
Pololu Isolated Solid State Relay/Switch, SPST, 60V, 7A
5V, 100mA Step-Down Voltage Regulator D45V1E2F5
Glideforce GF01-120501-1-66 Micro Linear Actuator with Limit Switches: 12V, 2.2kgf, 28mm/s, 10mm Stroke
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors