RK-1 robot

Posted by Paul on 14 June 2013

This successful kickstarter project is a wifi-enabled robot that is controlled through an iOS or Android app. It uses an Arduino, Pololu track set, and micro metal gearmotors.

Featured link: http://mymobilerobots.com/rk1/

0 comments

Post a comment

Using your Pololu account allows you to customize your avatar and manage your comments; you can also post anonymously.

New Products

JST PH-Style Cable with Female Pins for 0.1" Housings, 5-Pin, 30cm
QTRX-MD-01A-S Reflectance Sensor: 1-Channel, 8mm Wide, Analog Output, Low Current, Side-Entry Connector
0.100″ (2.54 mm) Breakaway Male Header: 1×2-Pin, Straight, Black, 100-Pack
APM81815 Step-Down Voltage Regulator Carrier, 3.3V Out
8.4V, 5A Step-Down Voltage Regulator D42V55F8
ACS37030LMYATR-040B3 Current Sensor Large Carrier -40A to +40A, 3.3V
A89301-Based Sensorless Brushless Motor Controller, 50V, 11A (Soldered Connectors)
Pololu Basic 2-Channel SPDT Relay Carrier for "Sugar Cube" Relays with JST SH-Style Top-Entry Connector
12V Step-Up Voltage Regulator U3V9F12
0.100″ (2.54 mm) Breakaway Male Header: 1×10-Pin, Straight, Black, 25-Pack
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors