3pi PCB skeleton

Posted by Paul on 21 October 2010
3pi PCB skeleton

Alex Louden has released an open-source template for custom 3pi expansion boards for use with the Eagle PCB design software. The picture shows an example expansion with an mbed microcontroller, Xbee, and accelerometers.

Featured link: http://alexlouden.com/2010/3pi-pcb-skeleton/


Post a comment

Using your Pololu account allows you to customize your avatar and manage your comments; you can also post anonymously.

New Products

Big MOSFET Slide Switch with Reverse Voltage Protection, HP
Pololu 3.3V, 2.6A Step-Down Voltage Regulator D24V22F3
100:1 Metal Gearmotor 37Dx73L mm with 64 CPR Encoder
0.1" (2.54mm) Crimp Connector Housing: 2x17-Pin 5-Pack
Pololu 9V, 2.3A Step-Down Voltage Regulator D24V22F9
30:1 Metal Gearmotor 37Dx68L mm with 64 CPR Encoder
0.1" (2.54mm) Crimp Connector Housing: 2x18-Pin 5-Pack
Free Circuit Cellar magazine November 2015
1000:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft
50:1 Metal Gearmotor 37Dx70L mm with 64 CPR Encoder
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors