Pololu IR Beacon Transceiver

Pololu IR Beacon Transceiver
Pololu item #: 701 17 in stock

Price break Unit price (US$)
1 27.95

backorders allowed

The Pololu IR beacon is a compact board that is used in pairs to allow robots to locate each other. Each board has infrared emitters that shine in all directions and four IR receivers for detecting the other beacon. The IR beacons have a range of about fifteen feet indoors. This item is for a single unit.

 Description Specs (0) Pictures (2) Resources (2) FAQs (3) On the blog (0) 
Do the IR beacons work outside?
Not really. Because the IR beacons are based on light, brighter ambient conditions will result in a lower operating range. Outdoor applications also usually require longer ranges, and the maximum range of these IR beacons is about 20 feet (indoors).
Can I add IR filters to prevent interference from fluorescent lights?
The IR sensor modules already include IR filters. The problem is that some types of fluorescent lights emit the same kind of IR as the beacons use (same light wavelength, same modulation frequency), so there’s not much you can do about it. Sometimes, shielding the sensors from direct view of the lights can be enough to make things work (that’s why they are on the bottom of the PCB).
How much current does the Pololu IR beacon draw?

The IR emitters are driven in brief bursts of high current, so the peak current is much higher than the average. Also, the beacon tries to compensate for input voltage by changing the duty cycle of the bursts, so the peak current changes with voltage much more than the average current. Here are a few typical operating points:

Input Voltage Peak Current Average Current
5 V 200 mA 30 mA
6 V 300 mA 40 mA
9 V 600 mA 45 mA
12 V 750 mA 35 mA

The currents above do not include the current used for any IR receivers, which typically use a few mA each. (This information applies only to IR beacons running the preloaded Pololu firmware.)