Brushed DC Motor Controllers » Motoron Motor Controllers » Motoron M2H Dual High-Power Motor Controllers for Raspberry Pi »
Motoron M2H24v14 Dual High-Power Motor Controller Kit for Raspberry Pi
The Motoron M2H24v14 Dual High-Power Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. The M2H24v14 supports motor supply voltages from 6.5 V to 40 V and can deliver continuous output currents up to 14 A per motor. This version ships with aluminum standoffs, header pins, and terminal block options included but not soldered in.
Compare all products in Motoron M2H Dual High-Power Motor Controllers for Raspberry Pi.
| Description | Specs (14) | Pictures (13) | Resources (5) | FAQs (0) | On the blog (0) | Distributors (2) |
|---|
Dimensions
| Size: | 65 mm × 56 mm |
|---|---|
| Weight: | 17 g1 |
General specifications
| Channels: | 2 |
|---|---|
| Model: | Motoron M2H24v14 |
| Control interface: | I²C |
| Minimum operating voltage: | 6.5 V |
| Maximum operating voltage: | 40 V2 |
| Continuous output current per channel: | 14 A3 |
| Minimum logic voltage: | 3.0 V |
| Maximum logic voltage: | 5.5 V |
| Reverse voltage protection?: | Y |
| Connectors soldered?: | N |
Identifying markings
| PCB dev codes: | mc2h31a |
|---|---|
| Other PCB markings: | 0J13656 |
Notes:
- 1
- PCB assembly only, without optional included headers, terminal blocks, or standoffs.
- 2
- Absolute maximum; higher voltages can permanently destroy the motor drivers. Recommended maximum is approximately 34 V, which leaves a safety margin for ripple voltage on the supply line.
- 3
- Typical results at room temperature with both channels running at 90% duty cycle.
Related categories
Home | Forum | Blog | Support | Ordering Information | Lists | Distributors | BIG Order Form | About | Contact
© 2001–2025 Pololu Corporation
