Linear Actuators » Glideforce Light-Duty (LD) Linear Actuators » 5:1 Glideforce High-Speed LD Linear Actuators »
Glideforce GF23-120506-3-65 High-Speed LD Linear Actuator with Feedback: 12kgf, 6" Stroke (5.9" Usable), 3.3"/s, 12V
This 12 V high-speed light-duty (LD) linear actuator with a 5:1 gear reduction can lift loads up to 12 kgf [27 lbs or 120 N] and can withstand static loads up to 30 kgf [67 lbs or 300 N]. It has a maximum speed of 84 mm/s [3.3″/s] at no load and 75 mm/s [2.9″/s] at the maximum load. Limit switches at each end make the actuator easy to control over its full range of motion. The shaft holds its position when unpowered. This version has a 6-inch stroke (5.9″ usable) and a feedback potentiometer that lets you determine where the actuator is in its stroke.
Alternatives available with variations in these parameter(s): nominal stroke length feedback potentiometer included? linear speed @ 12V, no load Select variant…
Compare all products in 5:1 Glideforce High-Speed LD Linear Actuators.
|Description||Specs (18)||Pictures (10)||Resources (7)||FAQs (0)||On the blog (0)|
|Nominal stroke length:||6 in|
|Actual stroke length:||5.91 in|
|Retracted length:||11.69 in|
|Extended length:||17.60 in|
|Current @ 12V, no load:||1.1 A|
|Current @ 12V, max load:||3.4 A|
|Stall current @ 12V:||7 A1|
|Linear speed @ 12V, no load:||3.3 in/s|
|Linear speed @ 12V, max load:||2.9 in/s|
|Max linear force @ 12V:||27 lb2|
|Maximum duty cycle:||25%3|
|Feedback potentiometer included?:||Y|
|Limit switches included?:||Y|
|Minimum operating temperature:||-25.0 °C|
|Maximum operating temperature:||65 °C|
- This represents the maximum in-rush current when starting a stationary actuator. These actuators are NOT intended to be stalled, and they will not stall as long as maximum load ratings are respected.
- This is a dynamic load rating. The actuator is rated to withstand 67 lbs when not moving.
- Or one minute of continuous operation in four minutes.
- Total dust protection, water resistant.