Magnetic Encoder Pair Kit with Side-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V

Pololu item #: 4761
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

Price break Unit price (US$)
1 7.95
5 7.31
25 6.73
100 6.19


backorders allowed

Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and Hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit. These encoders have a side-entry, 6-pin male JST SH-type connector, and we have cables that work with them available in several lengths (12 cm, 30 cm, and 75 cm). This module is compatible with all of the dual-shaft micro metal gearmotors we carry, including the HPCB versions.

Alternatives available with variations in these parameter(s): connector Select variant…

 Description Specs (7) Pictures (17) Resources (5) FAQs (0) On the blog (2) 

Dimensions

Size: 14.2 mm × 11.6 mm1
Weight: 1.5 g2

General specifications

Minimum operating voltage: 2.7 V
Maximum operating voltage: 18 V
Connector: side-entry, 6-pin male, JST SH-type

Identifying markings

PCB dev codes: enc03d
Other PCB markings: 0J12461

Notes:

1
The assembled encoder will extend approximately 5 mm beyond the plastic motor end cap.
2
Weight of full set. Each encoder board weighs ~0.4 g and each magnet disc weighs ~0.3 g.

Related Products

Magnetic Encoder Pair Kit with Top-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V
6-Pin Single-Ended Female JST SH-Style Cable 12cm
6-Pin Single-Ended Female JST SH-Style Cable 30cm
6-Pin Single-Ended Female JST SH-Style Cable 75cm
Magnetic Encoder Disc for Micro Metal Gearmotors, OD 7.65 mm, ID 1.0 mm, 12 CPR (Bulk)
Magnetic Encoder Pair Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V
Optical Encoder Pair Kit for Micro Metal Gearmotors, 5V
Optical Encoder Pair Kit for Micro Metal Gearmotors, 3.3V
Magnetic Encoder Pair Kit for Mini Plastic Gearmotors, 12 CPR, 2.7-18V
Magnetic Encoder Pair Kit for 20D mm Metal Gearmotors, 20 CPR, 2.7-18V

Related Categories

Encoders for Micro Metal Gearmotors
Micro Metal Gearmotors with Extended Motor Shafts
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors