Sensors » Pololu QTR Reflectance Sensors » Medium-Density (MD) QTR Arrays »
QTRX-MD-01A-S Reflectance Sensor: 1-Channel, 8mm Wide, Analog Output, Low Current, Side-Entry Connector
| sensors | size (mm) |
output | max current | optimal range |
connector | |
|---|---|---|---|---|---|---|
| LED | board | |||||
| 1 | 8.1 × 15.2 | analog | 3.5 mA | 5 mA | 10 mm | side-entry |
This sensor uses an IR LED and a phototransistor to measure the light reflected from nearby surfaces. It operates from 2.9–5.5 V, with dimmable brightness control independent of the supply voltage. The optimal range is <5 mm, but it can detect high-reflectance objects out to around 30 mm. This version features a high-performance, low-current QTRX sensor with lenses and a connector that works with our 4-pin JST SH-style cables (compatible with SparkFun’s Qwiic and Adafruit’s STEMMA QT cables, but the interface is not I²C).
Alternatives available with variations in these parameter(s): sensor type sensor count sensor pitch output type Select variant…
Compare all products in Medium-Density (MD) QTR Arrays or Single-Channel QTR Reflectance Sensors.
| Description | Specs (15) | Pictures (10) | Resources (6) | FAQs (0) | On the blog (0) | Distributors (0) |
|---|
Dimensions
| Size: | 8.1 × 15.2 × 6.0 mm |
|---|---|
| Weight: | 0.4 g |
General specifications
| Maximum range: | 30 mm |
|---|---|
| Optimal range: | 10 mm |
| Minimum operating voltage: | 2.9 V |
| Maximum operating voltage: | 5.5 V |
| Connector: | side-entry, 4-pin JST SH-type |
| LED current: | 3.5 mA1 |
| Peak wavelength: | 940 nm |
| Maximum current draw: | 5 mA2 |
| Sensor type: | QTRX |
| Sensor count: | 1 |
| Output type: | A (analog voltages) |
Identifying markings
| PCB dev codes: | irs21m3 |
|---|---|
| Other PCB markings: | 0J158533 |
Notes:
Related categories
Home | Forum | Blog | Support | Ordering Information | Lists | Distributors | BIG Order Form | About | Contact
© 2001–2025 Pololu Corporation
