DRV8434S SPI Stepper Motor Driver Carrier, 2A Max. Current Limit

Pololu item #: 3768
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

Price break Unit price (US$)
1 12.95
5 11.91
25 10.96
100 10.08


backorders allowed

This breakout board for TI’s DRV8434S microstepping bipolar stepper motor driver operates from 4.5 V to 48 V and can deliver up to approximately 1.2 A continuous per phase without a heat sink or forced air flow (2 A peak). The SPI interface allows configuration of the current limit, step mode (11 step modes from full-step through 1/256-step), decay mode, and stall detection. The driver also features built-in protection against under-voltage, over-current, and over-temperature conditions. This version of has the maximum current limit set to a fixed 2A, and SPI can be used to set the actual current limit to any of 16 evenly spaced values from 125 mA up to 2 A (i.e. in increments of 125 mA).

Alternatives available with variations in these parameter(s): current limit control header pins soldered? Select variant…

 Description Specs (14) Pictures (8) Resources (8) FAQs (4) On the blog (1) 

DRV8434S SPI Stepper Motor Driver Carrier, 2A Max. Current Limit.

DRV8434S SPI Stepper Motor Driver Carrier, 2A Max. Current Limit (top view).

DRV8434S SPI Stepper Motor Driver Carrier, 2A Max. Current Limit, bottom view with dimensions.

DRV8434S SPI Stepper Motor Driver Carrier, 2A Max. Current Limit with included headers.

DRV8434S SPI Stepper Motor Driver Carrier, 2A Max. Current Limit with included header pins soldered.

Typical wiring diagram for connecting a microcontroller to a DRV8434S stepper motor driver carrier.

Schematic diagram of the DRV8434S SPI Stepper Motor Driver Carrier.

Schematic of nSLEEP and nFAULT pins on DRV8434/DRV8434A carriers.


Related Products

0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
DRV8434S SPI Stepper Motor Driver Carrier, Potentiometer for Max. Current Limit
DRV8434S SPI Stepper Motor Driver Carrier, Potentiometer for Max. Current Limit (Header Pins Soldered)
DRV8434S SPI Stepper Motor Driver Carrier, 2A Max. Current Limit (Header Pins Soldered)
DRV8434A Stepper Motor Driver Carrier
DRV8434A Stepper Motor Driver Carrier (Header Pins Soldered)

Related Categories

DRV8434x Stepper Motor Driver Carriers
16-pin Stepper Motor Drivers
Stepper Motor Drivers
Tic Stepper Motor Controllers
Stepper Motors
Solderless Breadboards
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Crimp Connector Housings
0.1″ (2.54 mm) Male Headers
0.1″ (2.54 mm) Female Headers
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors