Linear Actuators » Glideforce Light-Duty (LD) Linear Actuators » 10:1 Glideforce LD Linear Actuators »
Glideforce LACT8P-12V-10 Light-Duty Linear Actuator with Feedback: 25kgf, 8" Stroke (7.8" Usable), 1.1"/s, 12V
This 12 V light-duty (LD) linear actuator with a 10:1 gear reduction can lift loads up to 25 kgf [55 lbs or 250 N] and can withstand static loads up to 250 kgf [550 lbs or 2500 N]. It has a maximum speed of 28 mm/s [1.1″/s] at no load and 23 mm/s [0.9″/s] at the maximum load. Limit switches at each end make the actuator easy to control over its full range of motion. The shaft holds its position when unpowered. This version has a 8-inch stroke (7.8″ usable) and a feedback potentiometer that lets you determine where the actuator is in its stroke.
Alternatives available with variations in these parameter(s): nominal stroke length feedback potentiometer included? linear speed @ 12V, no load
|Description||Specs (18)||Pictures (10)||Resources (7)||FAQs (0)||On the blog (0)|
|Nominal stroke length:||8 in|
|Actual stroke length:||7.87 in|
|Retracted length:||13.70 in|
|Extended length:||21.57 in|
|Current @ 12V, no load:||1.2 A|
|Current @ 12V, max load:||3.2 A|
|Stall current @ 12V:||7 A1|
|Linear speed @ 12V, no load:||1.1 in/s|
|Linear speed @ 12V, max load:||0.9 in/s|
|Max linear force @ 12V:||55 lb2|
|Maximum duty cycle:||25%3|
|Feedback potentiometer included?:||Y|
|Limit switches included?:||Y|
|Minimum operating temperature:||-25.0 °C|
|Maximum operating temperature:||65 °C|
- This represents the maximum in-rush current when starting a stationary actuator. These actuators are NOT intended to be stalled, and they will not stall as long as maximum load ratings are respected.
- This is a dynamic load rating. The actuator is rated to withstand 500 lbs when not moving.
- Or one minute of continuous operation in four minutes.
- Total dust protection, water resistant.