Glideforce LACT4-1000BPL Industrial-Duty Linear Actuator with Ball Screw Drive and Feedback: 450kgf, 4" Stroke (2.8" Usable), 0.66"/s, 12V
This 12 V industrial-duty (ID) linear actuator uses an efficient ball screw drive to lift loads up to 450 kgf [1000 lbs or 4500 N] and withstand static loads up to 1360 kgf [3000 lbs or 13,600 N]. It has a maximum speed of 16.8 mm/s [0.66″/s] at no load and 14.3 mm/s [0.56″/s] at the maximum load. Limit switches at each end make the actuator easy to control over its full range of motion, and an overload clutch protects the actuator from being damaged by excessive loads. The shaft holds its position when unpowered. This version has a 4-inch stroke (2.8″ usable) and a feedback potentiometer that lets you determine where the actuator is in its stroke.
Alternatives available with variations in these parameter(s): max linear force @ 12V nominal stroke length feedback potentiometer included?
|Description||Specs (20)||Pictures (7)||Resources (3)||FAQs (0)||On the blog (0)|
- Datasheet for Glideforce Industrial-Duty (ID) Linear Actuators (1MB pdf)
- 3D models of the Glideforce industrial-duty linear actuators (11MB zip)
- This file contains 3D models (in the step file format) of the Glideforce industrial-duty linear actuators for both ball screw and ACME screw drive, with and without feedback.
- Jrk G2 24v21 settings for ID linear actuators (2k txt)
- Use a Jrk G2 24v21 to precisely control our Glideforce industrial-duty (ID) series linear actuators with feedback. Instructions for using this file can be found on the linear actuator product pages.