Glideforce MD122004-P Medium-Duty Linear Actuator with Feedback: 100kgf, 4" Stroke (3.9" Usable), 0.58"/s, 12V
This 12 V medium-duty (MD) linear actuator can lift loads up to 100 kgf [225 lbs or 1000 N] and can withstand static loads up to 450 kgf [1000 lbs or 4500 N]. It has a maximum speed of 14.7 mm/s [0.58″/s] at no load and 10.4 mm/s [0.41″/s] at the maximum load. Limit switches at each end make the actuator easy to control over its full range of motion. The shaft holds its position when unpowered. This version has a 4-inch stroke (3.9″ usable) and a feedback potentiometer that lets you determine where the actuator is in its stroke.
Alternatives available with variations in these parameter(s): nominal stroke length feedback potentiometer included?
|Description||Specs (18)||Pictures (9)||Resources (3)||FAQs (0)||On the blog (1)|
Glideforce Medium-Duty (MD) series of linear actuators.
Glideforce Medium-Duty (MD) series of linear actuators with feedback.
Connectors that terminate the cable ends of Glideforce Medium-Duty (MD) linear actuators with feedback.
Dimensions of Glideforce MD linear actuators with feedback. Units are mm.
Glideforce Medium-Duty (MD) series of linear actuators without feedback.
Unterminated wire ends for Glideforce Medium-Duty (MD) linear actuators without feedback.
Dimensions of Glideforce MD linear actuators without feedback. Units are mm.
Glideforce MD122004 medium-duty linear actuator (4″ stroke) with shaft fully extended.
Connecting a medium-duty linear actuator with feedback to a Jrk 24v13 motor controller.