Motion Control Modules » Stepper Motor Drivers » DRV8825 Stepper Motor Driver Carriers, High Current »
DRV8825 Stepper Motor Driver Carrier, High Current (Header Pins Soldered)
This version of our DRV8825 Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Please see the DRV8825 Stepper Motor Driver Carrier product page for more information about the driver.
Alternatives available with variations in these parameter(s): header pins soldered? bulk packaged? Select variant…
Compare all products in DRV8825 Stepper Motor Driver Carriers, High Current or 16-pin Stepper Motor Drivers.
| Description | Specs (14) | Pictures (5) | Resources (6) | FAQs (4) | On the blog (1) |
|---|
Dimensions
| Size: | 0.6″ × 0.8″ |
|---|---|
| Weight: | 2.7 g |
General specifications
| Minimum operating voltage: | 8.2 V |
|---|---|
| Maximum operating voltage: | 45 V |
| Continuous current per phase: | 1.5 A1 |
| Maximum current per phase: | 2.2 A2 |
| Minimum logic voltage: | 2.5 V3 |
| Maximum logic voltage: | 5.25 V3 |
| Microstep resolutions: | full, 1/2, 1/4, 1/8, 1/16, and 1/32 |
| Reverse voltage protection?: | N |
| Bulk packaged?: | N |
| Header pins soldered?: | Y |
Identifying markings
| PCB dev codes: | md20b |
|---|---|
| Other PCB markings: | blank white box |
Notes:
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
