Pololu DRV8835 Dual Motor Driver Kit for Raspberry Pi

Pololu item #: 2753 71 in stock

Price break Unit price (US$)
1 7.49
5 6.49
25 5.75
100 5.25


backorders allowed

This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+, Pi A+, Pi 2, or Pi 3 and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Its integrated DRV8835 dual motor driver allows it to operate from 1.5 V to 11 V, making it a great control option for low-voltage motors. The board can deliver a continuous 1.2 A (1.5 A peak) per motor, or a continuous 2.4 A (3 A peak) to a single motor when configured with both channels connected in parallel.

 Description Specs (11) Pictures (10) Resources (4) FAQs (0) On the blog (4) 

Pololu DRV8835 Dual Motor Driver Kit for Raspberry Pi.

Pololu DRV8835 dual motor driver board for Raspberry Pi, top view with dimensions.

Pololu DRV8835 dual motor driver kit (assembled) on a Raspberry Pi Model B+.

Pololu DRV8835 dual motor driver board for Raspberry Pi, top and bottom sides.

Pololu DRV8835 Dual Motor Driver Kit for Raspberry Pi assembled with included hardware, bottom view.

Pololu DRV8835 dual motor driver kit (assembled) on a Raspberry Pi Model B+.

Driving motors with an assembled Pololu DRV8835 Dual Motor Driver Kit on a Raspberry Pi B+. A step-up/step-down regulator provides 5 V to the Raspberry Pi.

Pinout and default pin mappings of the Pololu DRV8835 dual motor driver board for Raspberry Pi.

S7V7F5 step-up/step-down regulator connected to an assembled Pololu DRV8835 Dual Motor Driver Kit for Raspberry Pi.

Pololu DRV8835 Dual Motor Driver Kit for Raspberry Pi schematic diagram.


Related Products

Raspberry Pi 3 Model B
Raspberry Pi 1 Model A+ 512MB
Pololu Dual MC33926 Motor Driver for Raspberry Pi (Partial Kit)
Pololu Dual MC33926 Motor Driver for Raspberry Pi (Assembled)
A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge
A-Star 32U4 Robot Controller SV with Raspberry Pi Bridge
Pololu 5V Step-Up/Step-Down Voltage Regulator S7V7F5
Pololu DRV8835 Dual Motor Driver Shield for Arduino
0.100" (2.54 mm) Female Header: 2x17-Pin, Straight
DRV8835 Dual Motor Driver Carrier
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Double-Sided
0.100" (2.54 mm) Shorting Block: Blue, Top Closed
30:1 Micro Metal Gearmotor MP 6V
120:1 Mini Plastic Gearmotor, 90° 3mm D-Shaft Output

Related Categories

Brushed DC Motor Drivers
Raspberry Pi
Raspberry Pi Expansion Boards
Brushed DC Motor Controllers
Micro Metal Gearmotors
Pololu Plastic Gearmotors
Premium Jumper Wires
Wires with Pre-crimped Terminals
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors