Linear Actuators » Glideforce Light-Duty (LD) Linear Actuators » 5:1 Glideforce LD Linear Actuators »
Glideforce LACT6P-12V-05 Light-Duty Linear Actuator with Feedback: 25kgf, 6" Stroke (5.9" Usable), 1.7"/s, 12V
This 12 V light-duty (LD) linear actuator with a 5:1 gear reduction can lift loads up to 15 kgf [34 lbs or 150 N] and can withstand static loads up to 250 kgf [550 lbs or 2500 N]. It has a maximum speed of 43.9 mm/s [1.73″/s] at no load and 36.5 mm/s [1.44″/s] at the maximum load. Limit switches at each end make the actuator easy to control over its full range of motion, and the worm drive ensures that the shaft will hold its position even when unpowered. This version has a 6-inch stroke (5.9″ usable) and a feedback potentiometer that lets you determine where the actuator is in its stroke.
Alternatives available with variations in these parameter(s): nominal stroke length feedback potentiometer included? linear speed @ 12V, no load
|Description||Specs (18)||Pictures (10)||Resources (3)||FAQs (0)||On the blog (1)|
Glideforce Light-Duty (LD) series of linear actuators.
Glideforce Light-Duty (LD) series of linear actuators with feedback.
Connectors that terminate the cable ends of Glideforce Ledium-Duty (LD) linear actuators with feedback.
Dimensions of Glideforce LD linear actuators with feedback. Units are mm.
Glideforce Light-Duty (LD) series of linear actuators without feedback.
Unterminated wire ends for Glideforce Light-Duty (LD) linear actuators without feedback.
Dimensions of Glideforce LD linear actuators without feedback. Units are mm.
Glideforce LACT4 light-duty linear actuator (4″ stroke) with shaft fully extended.
Connecting the bracket to one end of a Concentric LD linear actuator.
Connecting a light-duty linear actuator with feedback to a Jrk 21v3 motor controller.