Glideforce LACT4P-12V-05 Light-Duty Linear Actuator with Feedback: 15kgf, 4" Stroke, 1.7"/s, 12V
This 12 V light-duty (LD) linear actuator with a 5:1 gear reduction can lift loads up to 15 kgf [34 lbs or 150 N] and can withstand static loads up to 250 kgf [550 lbs or 2500 N]. It has a maximum speed of 43.9 mm/s [1.73″/s] at no load and 36.5 mm/s [1.44″/s] at the maximum load. Limit switches at each end make the actuator easy to control over its full range of motion, and the worm drive ensures that the shaft will hold its position even when unpowered. This version has a 4-inch stroke and a feedback potentiometer that lets you determine where the actuator is in its stroke.
Alternatives available with variations in these parameter(s): nominal stroke length feedback potentiometer included? linear speed @ 12V, no load
|Description||Specs (18)||Pictures (9)||Resources (2)||FAQs (0)||On the blog (0)|
Concentric LD series linear actuators.
Concentric linear actuator with feedback, 4" Stroke (LACT4P), shaft fully extended.
Concentric linear actuator without feedback, opened to show gears.
Connecting the bracket to one end of a Concentric LD linear actuator.
Unterminated wire ends for Concentric linear actuators without feedback.
Connectors for Concentric LD linear actuators with feedback.
Dimensions of Glideforce LD linear actuators without feedback. Units are mm.
Dimensions of Glideforce LD linear actuators with feedback. Units are mm.
Connecting a linear actuator with feedback to a jrk 21v3 motor controller.