Linear Actuators » Glideforce Light-Duty (LD) Linear Actuators » 20:1 Glideforce LD Linear Actuators »
Glideforce LACT12P-12V-20 Light-Duty Linear Actuator with Feedback: 50kgf, 12" Stroke (11.8" Usable), 0.57"/s, 12V
This 12 V light-duty (LD) linear actuator with a 20:1 gear reduction can lift loads up to 50 kgf [110 lbs or 500 N] and can withstand static loads up to 250 kgf [550 lbs or 2500 N]. It has a maximum speed of 14.6 mm/s [0.57″/s] at no load and 12.3 mm/s [0.48″/s] at the maximum load. Limit switches at each end make the actuator easy to control over its full range of motion. The shaft holds its position when unpowered. This version has a 12-inch stroke (11.8″ usable) and a feedback potentiometer that lets you determine where the actuator is in its stroke.
Alternatives available with variations in these parameter(s): nominal stroke length feedback potentiometer included? linear speed @ 12V, no load
|Description||Specs (18)||Pictures (10)||Resources (3)||FAQs (0)||On the blog (1)|
Glideforce Light-Duty (LD) series of linear actuators.
Glideforce Light-Duty (LD) series of linear actuators with feedback.
Connectors that terminate the cable ends of Glideforce Ledium-Duty (LD) linear actuators with feedback.
Dimensions of Glideforce LD linear actuators with feedback. Units are mm.
Glideforce Light-Duty (LD) series of linear actuators without feedback.
Unterminated wire ends for Glideforce Light-Duty (LD) linear actuators without feedback.
Dimensions of Glideforce LD linear actuators without feedback. Units are mm.
Glideforce LACT4 light-duty linear actuator (4″ stroke) with shaft fully extended.
Connecting the bracket to one end of a Concentric LD linear actuator.
Connecting a light-duty linear actuator with feedback to a Jrk 21v3 motor controller.