Glideforce LACT8P-12V-20 Light-Duty Linear Actuator with Feedback: 50kgf, 8" Stroke, 0.57"/s, 12V

Pololu item #: 2309 15 in stock
Brand: Concentric

Price break Unit price (US$)
1 129.95
5 123.45


backorders allowed

This 12 V light-duty (LD) linear actuator with a 20:1 gear reduction can lift loads up to 50 kgf [110 lbs or 500 N] and can withstand static loads up to 250 kgf [550 lbs or 2500 N]. It has a maximum speed of 14.6 mm/s [0.57″/s] at no load and 12.3 mm/s [0.48″/s] at the maximum load. Limit switches at each end make the actuator easy to control over its full range of motion, and the worm drive ensures that the shaft will hold its position even when unpowered. This version has a 8-inch stroke and a feedback potentiometer that lets you determine where the actuator is in its stroke.

Alternatives available with variations in these parameter(s): nominal stroke length feedback potentiometer included? linear speed @ 12V, no load Select variant…

 Description Specs (18) Pictures (9) Resources (2) FAQs (0) On the blog (0) 

Dimensions

Nominal stroke length: 8 in
Actual stroke length: 7.87 in
Retracted length: 13.70 in
Extended length: 21.57 in
Weight: 1.4 kg

General specifications

Gear ratio: 20:1
Current @ 12V, no load: 1.2 A
Current @ 12V, max load: 3.2 A
Stall current @ 12V: 7 A1
Linear speed @ 12V, no load: 0.57 in/s
Linear speed @ 12V, max load: 0.48 in/s
Max linear force @ 12V: 110 lb2
Maximum duty cycle: 25%3
Feedback potentiometer included?: Y
Limit switches included?: Y
Minimum operating temperature: -25.0 °C
Maximum operating temperature: 65 °C
IP rating: IP654

Notes:

1
This represents the maximum in-rush current when starting a stationary actuator. These actuators are NOT intended to be stalled, and they will not stall as long as maximum load ratings are respected.
2
This is a dynamic load rating. The actuator is rated to withstand 500 lbs when not moving.
3
Or one minute of continuous operation in four minutes.
4
Total dust protection, water resistant.

Related Products

Mounting Bracket for Glideforce Light-Duty Linear Actuators - Aluminum
Mounting Bracket Pair for Glideforce Light-Duty Linear Actuators - Steel
10ft Extension Cable for Glideforce Light-Duty/Medium-Duty Linear Actuators with Feedback
Stepper Motor with 28cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
Jrk 21v3 USB Motor Controller with Feedback
Pololu Simple Motor Controller 18v7 (Fully Assembled)
Jrk G2 18v19 USB Motor Controller with Feedback
MC33926 Motor Driver Carrier
VNH5019 Motor Driver Carrier

Related Categories

Glideforce Light-Duty (LD) Linear Actuators
Glideforce Medium-Duty (MD) Linear Actuators
Glideforce Industrial-Duty (ID) Linear Actuators
Pololu Jrk Motor Controllers with Feedback
Brushed DC Motor Controllers
Brushed DC Motor Drivers
Motors and Gearboxes
RC Servos
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors