Stepper Motor: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase

Pololu item #: 2267
Brand: SOYO
Status: Active and Preferred 
RoHS 3 compliant

Price break Unit price (US$)
1 21.95
5 20.63
25 19.40


backorders allowed

This NEMA 17-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).

 Description Specs (13) Pictures (7) Resources (1) FAQs (2) On the blog (3) 

Dimensions

Size: 42.3 mm square × 38 mm
(NEMA 17)1
NEMA size: 17
Weight: 285 g
Shaft diameter: 5 mm

General specifications

Shaft type: 5 mm "D"
Current rating: 1680 mA2
Voltage rating: 2.8 V
Holding torque: 51 oz·in
Steps per revolution: 200
Resistance: 1.65 Ohm2
Inductance per phase: 3.2 mH
Number of leads: 4
Lead length: 30 cm

Notes:

1
Not including the shaft.
2
Per coil.

Related Products

Pololu Stamped Aluminum L-Bracket for NEMA 17 Stepper Motors
Stepper Motor with 18cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
Stepper Motor with 28cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
Stepper Motor with 38cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller (Connectors Soldered)
Tic T249 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
MP6500 Stepper Motor Driver Carrier, Potentiometer Current Control
MP6500 Stepper Motor Driver Carrier, Digital Current Control
AMIS-30543 Stepper Motor Driver Carrier
DRV8825 Stepper Motor Driver Carrier, High Current
DRV8834 Low-Voltage Stepper Motor Driver Carrier
A4988 Stepper Motor Driver Carrier, Black Edition
A4988 Stepper Motor Driver Carrier
Pololu Universal Aluminum Mounting Hub for 5mm Shaft, #4-40 Holes (2-Pack)
Pololu Universal Aluminum Mounting Hub for 5mm Shaft, M3 Holes (2-Pack)
Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 42×48mm, 4V, 1.2 A/Phase
Crimping Tool: 0.08-0.5 mm² Capacity, 20-28 AWG
Male Crimp Pins for 0.1" Housings 100-Pack
0.1" (2.54mm) Crimp Connector Housing: 1x4-Pin 10-Pack
0.1" (2.54mm) Crimp Connector Housing: 1x6-Pin 10-Pack

Related Categories

Stepper Motors
Tic Stepper Motor Controllers
Stepper Motor Drivers
Robot Controllers
Crimp Connector Housings
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors