Cables and Wire » JST PH-Style Cables » 3-Pin JST PH-Style Cables »
3-Pin Female JST PH-Style Cable (30 cm) with Male Pins for 0.1" Housings
30 cm (12″) cable has 26 AWG wires with a 3-pin female JST PH-style connector that works with Sharp analog distance sensors that have mating PH connectors. The other ends of the wire are terminated with male pins for 0.1" housing.
Note: The wire color order of this cable matches the Sharp distance sensor pinout (red on pin 1 for power, black on pin 2 for ground, and white on pin 3 for signal); this differs from the color order convention followed by most of our other JST PH cables.
Alternatives available with variations in these parameter(s): gender Select variant…
| Description | Specs (8) | Pictures (3) | Resources (1) | FAQs (0) | On the blog (1) | Distributors (28) |
|---|
Dimensions
| Pins: | 1×3 |
|---|---|
| Pitch: | 2 mm |
| Length: | 30 cm |
General specifications
| Gender: | Female-Male |
|---|---|
| Wire gauge: | 26 AWG |
| Current rating: | 2 A |
| Voltage rating: | 100 V |
| Connector: | JST PH-type |
Related products
Home | Forum | Blog | Support | Ordering Information | Lists | Distributors | BIG Order Form | About | Contact
© 2001–2025 Pololu Corporation
