LSM303DLM 3D Compass and Accelerometer Carrier with Voltage Regulators

Pololu item #: 1273

This product has been discontinued.

This board has been replaced by the newer LSM303D carrier, which offer improved magnetic sensing resolution, a wider acceleration measurement range, and the option of using an SPI interface rather than I²C.

The LSM303DLM combines a digital 3-axis accelerometer and 3-axis magnetometer into a single package that is ideal for making a tilt-compensated compass. The six independent readings, whose sensitivities can be set in the ranges of ±2 to ±8 g and ±1.3 to ±8.1 gauss, are available through an I²C interface. The carrier board operates from 2.6 to 5.5 V and has a 0.1″ pin spacing.

 Description Specs (7) Pictures (5) Resources (7) FAQs (1) On the blog (1) 

Related Products

LSM303DLHC 3D Compass and Accelerometer Carrier with Voltage Regulator
MinIMU-9 v3 Gyro, Accelerometer, and Compass (L3GD20H and LSM303D Carrier)
LSM303D 3D Compass and Accelerometer Carrier with Voltage Regulator
L3GD20 3-Axis Gyro Carrier with Voltage Regulator
L3GD20H 3-Axis Gyro Carrier with Voltage Regulator
UM7 Orientation Sensor
UM7-LT Orientation Sensor
LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator
LOCOSYS LS20031 66-Channel GPS Receiver Module (MT3339 Chipset)
Adafruit Data Logging Shield for Arduino
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Right Angle

Related Categories

Accelerometers, Gyros, & Compasses
Development Boards (Programmable Controllers)
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Crimp Connector Housings
Solderless Breadboards
0.1″ (2.54 mm) Female Headers
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors