Cyber Week Sale – click for coupon codes!

ACS715 Current Sensor Carrier 0 to 30A

Pololu item #: 1186
Brand: Pololu
Status: Discontinued 

This product has been discontinued.

Please consider the ACS724 Current Sensor Carrier 0A to 30A as an alternative.

This board is a simple carrier of Allegro’s 30A ACS715 Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.1 kV RMS. This version accepts a unidirectional current input up to 30 A and outputs a proportional analog voltage (133 mV/A) that measures 500 mV when the input current is zero. The typical output error is ±1.5%. It operates from 4.5 V to 5.5 V and is intended for use in 5 V systems.

 Description Specs (6) Pictures (2) Resources (2) FAQs (0) On the blog (1) 
  • Monitoring power consumption with the ACS715

    Monitoring power consumption with the ACS715

    by Paul - 21 September 2012

    This blog post by Steve Spence discusses using an ACS715 Current Sensor Carrier to monitor the current consumption of a ham radio when in emergency...

Related Products

ACS724LLCTR-30AU Current Sensor Carrier 0A to 30A
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Right Angle
T Connector Male-Female Pair
Screwless Terminal Block: 2-Pin, 0.1″ Pitch, Side Entry (3-Pack)
Premium Jumper Wire 50-Piece 10-Color Assortment F-F 6"

Related Categories

ACS724 Current Sensor Carriers
Current Sensors
Terminal Blocks
Premium Jumper Wires
Electronics Prototyping
Sensors
Motion Control Modules
Motors and Gearboxes
RC Servos
Pololu High-Power Motor Drivers
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors