Mechanical Components » Motors and Gearboxes » Pololu Plastic Gearmotors »
228:1 Plastic Gearmotor, Offset Output
This 228:1 gearbox with brushed DC motor has a low-current motor and provides power and speed that is comparable to an RC servo at a fraction of the cost. At 6 V, it has a free-run speed of 45 RPM and a stall torque of approximately 100 oz-in. Though the product picture shows two gearmotors, this product is for a single motor.
| Description | Specs (9) | Pictures (11) | Resources (2) | FAQs (1) | On the blog (2) |
|---|
Dimensions
| Size: | 42 x 22.7 x 47.8 mm1 |
|---|---|
| Weight: | 33 g |
| Shaft diameter: | 7 mm |
General specifications
| Typical operating voltage: | 6 V |
|---|---|
| Gear ratio: | 228:1 |
| No-load speed @ 6V: | 45 rpm |
| No-load current @ 6V: | 70 mA |
| Stall current @ 6V: | 800 mA |
| Stall torque @ 6V: | 100 oz·in |
Notes:
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2019 Pololu Corporation
