Hardware » Brackets » Motor Brackets »
Pololu Stamped Aluminum L-Bracket Pair for Plastic Gearmotors
These aluminum gearmotor brackets let you securely mount our larger Pololu plastic gearmotors (228:1 offset, 120:1 offset, 200:1 90-degree, and 120:1 90-degree) to your project. These brackets are sold in pairs, and each bracket comes with two 1″ long and two 0.75″ long #2-56 screws for securing different size motors. Each bracket also features two mounting holes and one mounting slot intended for #4-size screws (not included).
|Description||Specs (1)||Pictures (4)||Resources (2)||FAQs (0)||On the blog (1)|
These light-weight brackets (approximately 2 g each) are specifically designed for our larger Pololu plastic gearmotors (228:1 offset, 120:1 offset, 200:1 90-degree, and 120:1 90-degree). Each bracket features two mounting holes and one mounting slot intended for #4-size screws (not included). We also offer an extended version of this bracket that allows for even more mounting options and might work better for particular applications.
A total of four 1″ long #2-56 screws, for use with the 228:1 offset and 120:1 offset plastic gearmotors, and four 0.75″ long #2-56 screws, for use with the 200:1 90-degree and 120:1 90-degree plastic gearmotors, are included. Two #2-56 hex nuts are also included for each bracket. Only two screws are used to mount a motor to each bracket, as shown in the pictures below:
The following drawing shows the bracket dimensions in mm.
Mechanical drawing for the Pololu stamped aluminum L-bracket for plastic gearmotors. Units are mm over [inches].
This drawing is also available as a downloadable PDF (125k pdf).
People often buy this product together with:
|200:1 Plastic Gearmotor, 90° Output|
|120:1 Plastic Gearmotor, 90° Output|
|MinIMU-9 v5 Gyro, Accelerometer, and Compass (LSM6DS33 and LIS3MDL Carrier)|